Distinct corrosion behavior was reported in multiphased titanium alloys prepared by additive
manufacturing and by traditional technologies because of different phase constituents …

The use of nanostructuring to improve the stability of passive thin films on biomaterials can
enhance their effectiveness in corrosion resistance and reduce the release of ions. The …

The corrosion resistance of Ti–Si alloys has been studied in acid solutions and the alloys
exhibit a high resistance to corrosion. SEM examinations combined with EDAX allowed to …

Surface structures and properties of titanium implants play a vital role in successful bone
replacement. To mimic the natural bone structure, some strategies have recently focused on …

Post-process modifications in the form of Hot Isostatic Pressing or surface treatment methods
such as sandblasting or machining have been widely used in the case of improving the …

In order to elucidate the distinct corrosion properties of CP-Ti and Ti-6Al-4V alloys
manufactured by selective laser melting (SLM) as biomaterials in human body fluids …

In this study, TiNbTa and TiNbTaZr films were utilized as protective coatings on a Ti-6Al-4V
alloy to inhibit corrosive attacks from NaCl aqueous solution and simulated body fluid. The …

Isotropic etching polishing (IEP) based on the merging of isotropic etch pits has been
proposed as a generic metal finishing approach. In this work, the tuning of the etching …

The entire route from anodic oxidation and surface characterization, including in vitro
experiments and finally in vivo osseointegration assays were performed with the aim to …

Owing to the layer-wise characteristic of additive manufacturing (AM) technologies, the
microstructure of AM-produced titanium alloys inevitably differs from the alloys produced by …