Detection and characterization of stress-corrosion cracking on 304 stainless steel by electrochemical noise and acoustic emission techniques

G Du, J Li, WK Wang, C Jiang, SZ Song - Corrosion Science, 2011 - Elsevier
This paper focuses on the corrosion process of 304 stainless steel in acidic NaCl solution
during slow strain rate testing experiment by using electrochemical noise (EN) and acoustic …

In-situ monitoring of pitting corrosion on vertically positioned 304 stainless steel by analyzing acoustic-emission energy parameter

K Wu, WS Jung, JW Byeon - Corrosion science, 2016 - Elsevier
The acoustic emission (AE) energy was analyzed to monitor the pitting process on a
vertically positioned 304-stainless steel. The gravity-dependent morphology of the …

Exploring multi-step glucose oxidation kinetics at GOx-functionalized nanotextured gold surfaces with differential impedimetric technique

W Lipińska, J Ryl, P Slepski, K Siuzdak, K Grochowska - Measurement, 2021 - Elsevier
For a few past years, we can observe the enormous growth of investigations related to
ultrasensitive electrochemical sensors capable of reliable determination of important body …

Acoustic emission behaviour during the evolution of a single pit on stainless steels

Y Wu, J Nong, S Yuan, Q Guo, J Xu - Corrosion Science, 2021 - Elsevier
The current study investigated the acoustic emission (AE) behaviour of a single pit evolution
on two types of stainless steels using small-scaled electrodes. Dozens of AE signals were …

[HTML][HTML] Monitoring of atmospheric corrosion of aircraft aluminum alloy AA2024 by acoustic emission measurements

T Erlinger, C Kralovec, M Schagerl - Applied Sciences, 2022 - mdpi.com
Atmospheric corrosion of aluminum aircraft structures occurs due to a variety of reasons. A
typical phenomenon leading to corrosion during aircraft operation is the deliquescence of …

Instantaneous impedance monitoring of aluminum alloy 7075 corrosion in borate buffer with admixed chloride ions

J Orlikowski, J Ryl, M Jarzynka, S Krakowiak… - …, 2015 - meridian.allenpress.com
This study presents research capabilities of dynamic electrochemical impedance
spectroscopy (DEIS) as a tool used for instantaneous online monitoring of corrosion …

酸性NaCl 溶液中304 控氮不锈钢腐蚀过程的声发射特征

王伟魁, 杜刚, 曾周末, 邓伟峰, 宋诗哲 - 化工学报, 2010 - hgxb.cip.com.cn
采用声发射技术和电化学噪声技术研究了304 控氮不锈钢C 型环试样在0.5 mol· L-1 NaCl 与1.5
mol· L-1 H 2 SO 4 的混合溶液中, 恒载荷情况下的腐蚀过程. 分析了腐蚀过程中所产生的声发射 …

The classification of acoustic emission signals of 304 stainless steel during stress corrosion process based on K‐means clustering

J Li, G Du, C Jiang, S Jin - Anti-Corrosion Methods and Materials, 2012 - emerald.com
Purpose–The purpose of this paper is to classify and identify the acoustic emission (AE)
signals of 304 stainless steel during stress corrosion process. Design/methodology …

Cluster analysis of acoustic emission signals in pitting corrosion of low carbon steel: Clusteranalyse des Schallemissionssignals bei Lochkorrosion von niedrig …

H Bi, Z Li, D Hu, I Toku‐Gyamerah… - Materialwissenschaft …, 2015 - Wiley Online Library
The pitting corrosion characteristics of low carbon steel specimens are studied by acoustic
emission (AE) and electrochemical techniques, in a 3.0 wt.% NaCl solution acidified to pH …

Nondestructive testing and corrosion monitoring

A Groysman - Non‐Destructive Evaluation of Corrosion and …, 2019 - Wiley Online Library
This chapter describes the principles and industrial achievements in nondestructive testing
(NDT) and corrosion monitoring (CM) during the years 2001‐2010. It helps to select NDT …