Cemented carbides, known as the" teeth of industry", are widely used in aerospace,
resource mining, equipment manufacturing, rail transit, and electronic information industries …

Hardmetals, commonly referred to as cemented tungsten carbide (WC) or simply tungsten
carbide, is one of the oldest liquid phase sintered, two phase composite, powder …

A Single laser scan was performed on a sintered WC/Co composite and the process
conditions were optimized to realize a WC/Co two-phase microstructure in a WC/Co …

In this study, we investigated the microstructure, mechanical and wear properties of WC-
12Co cemented carbides fabricated via selective electron beam melting (SEBM) …

In this study, an attempt is made to control the WC-Co two-phase microstructures by laser
powder-bed fusion (LPBF) process using cemented carbide powders with different …

The microstructural and wear properties of WC–12Co (wt.%) cemented carbide bulk material
manufactured by additive manufacturing direct energy deposition (DED) process were …

The WC-Co cemented carbides with near fully-dense and crack-free microstructure were
fabricated by the laser powder bed fusion (LPBF) process and a subsequent heat-treatment …

In this study, WC-12Co cemented carbides were fabricated by selective laser melting (SLM)
and subsequently subjected to sintering. Effects of the scanning speed on the …

Pores is one of the most defects during laser additive manufacturing of ceramic material. In
this paper, different structures of Al 2 O 3–ZrO 2 ceramics are deposited by using powder …

Laser-Directed Energy Deposition (L-DED) is an additive manufacturing technique that has
lately been employed to deposit coatings of cemented carbides, such as WC-Co. During …