Review and perspectives: shape memory alloy composite systems

BT Lester, T Baxevanis, Y Chemisky, DC Lagoudas - Acta Mechanica, 2015 - Springer
Following their discovery in the early 1960s, there has been a continuous quest for ways to
take advantage of the extraordinary properties of shape memory alloys (SMAs). These …

Atomic level out-diffusion and interfacial reactions of MAX phases in contact with metals and air

C Ma, YU Wenbo, Y Ma, G Ma, W Haidou - Journal of the European …, 2023 - Elsevier
The outwards diffusion of Al and Si elements in Al-containing and Si-containing MAX phases
endows them one natural advantage to form anti-oxidation layer and strong interfacial …

Solid-state welding of nitinol shape memory alloys: A review

SSM Prabu, S Aravindan, S Ghosh, IA Palani - Materials Today …, 2023 - Elsevier
Nitinol shape memory alloys are widely explored and applied in various engineering
applications owing to their distinctive shape memory effect and pseudoelasticity. The …

Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: Interfacial microstructure and mechanical properties

J Liu, J Cao, X Song, Y Wang, J Feng - Materials & Design, 2014 - Elsevier
Diffusion bonding of TiAl alloys and Ti 3 SiC 2 ceramics were carried out in a vacuum
atmosphere. The microstructures and mechanical properties of the bonded joints were …

Microstructural evolution and growth kinetics of interfacial reaction layers in SUS430/Ti3SiC2 diffusion bonded joints using a Ni interlayer

Q Cheng, LL Zheng, XC Li, B Xu, MY Sun, J Shi… - Ceramics …, 2022 - Elsevier
Ti 3 SiC 2 ceramic and SUS430 stainless steel (SS) were successfully joined by a solid
diffusion bonding technique using Ni interlayers. Diffusion bonding was performed in the …

Contact-reactive brazing of Ti3SiC2 ceramic to TC4 alloy using a Ni interlayer: interfacial microstructure and joining properties

YH Xia, Y Wang, ZW Yang, DP Wang - Ceramics International, 2018 - Elsevier
Ti 3 SiC 2 ceramic and TC4 alloy were successfully joined by a contact-reactive brazing
technique using a Ni interlayer. The results showed that liquid phase formed by the eutectic …

Dissimilar transient liquid phase bonding of Ti–6Al–4V and Co–Cr–Mo biomaterials using a Cu interlayer: Microstructure and mechanical properties

S Vazirian, A Farzadi - Journal of Alloys and Compounds, 2020 - Elsevier
In order to construct a bimetallic device for the medical application, the selection of the
joining process is essential. Transient liquid phase (TLP) bonding of two biomaterials of Ti …

Effects of surface microstructure on the active element content and wetting behavior of brazing filler metal during brazing Ti3SiC2 ceramic and Cu

HY Chen, XC Wang, L Fu, MY Feng - Vacuum, 2018 - Elsevier
The wetting behavior of Ag-Cu-xTi (x= 0, 0.5, 1, 2, 3, 4.5 wt.%) brazing filler metals on Ti 3
SiC 2 ceramic was investigated. Moreover, two methods, the addition of reactive element Ti …

Microstructural evolution and growth kinetics of interfacial compounds in TiAl/Ti3SiC2 diffusion bonding joints

Q Wang, G Chen, K Wang, X Fu, W Zhou - Materials Science and …, 2019 - Elsevier
TiAl intermetallic was direct diffusion bonded to Ti 3 SiC 2 at 900° C, 950° C, and 1000° C
with a holding time ranging from 0.25 h to 64 h. The interfacial microstructural evolution, the …

Improvement for Ti3SiC2/Cu joint brazed using composite fillers with abnormal expansion ceramic particulates

H Chen, X Nai, S Zhao, D Lu, Z Shen… - Journal of the …, 2022 - Wiley Online Library
Reducing the residual stresses and improving the mechanical strength of large‐scale
ceramic/metal brazing joints is an important problem that must be solved for its practical …