Five different poly (ethylene terephthalate)(PET) materials (two recycled and three virgin
ones) were melt-spun into fibres using a capillary rheometer and aerodynamic stretching. In …

Bottle-recycled polyethylene terephthalate (R-PET) fibers were fabricated by the melt
spinning method. Based on characteristics of R-PET chips, this study involved a primary …

In this study two Poly (Ethylene Terephthalate)(PET) polymers obtained from mineral water
bottles and a virgin fiber grade PET polymer were investigated. In order to improve their …

The mechanical properties of monofilament yarns produced from blending virgin PET (V-
PET) pellets and recycled PET (R-PET) bottle flakes has been investigated. The V-PET/R …

Recycling opaque Polyethylene terephthalate (PET), which contains 1 to 10 wt% TiO2
submicron particles, has become of interest in the past few years. However, the bottle-to …

Material from recycled poly (ethylene terephthalate)(PET) chips obtained from used water
bottles was extruded with virgin fiber‐grade PET chips in blends of 20, 40, and 70 wt …

In this study, PET (intrinsic viscosity of 1.05 dl/g) was melt processed with a horizontal
isothermal bath (HIB) treatment. Tensile properties of PET fiber samples were highly …

A simplified mathematical model was given based on the actual experimental data from a
laboratory-scale poly (ethylene terephthalate)(PET) melt spinning. PET fibres were …

Centrifugal spinning, which is a high-productivity fiber fabrication technique, was used to
produce a value-added product from recycled poly (ethylene terephthalate)(rPET). In the …

Influence of spinning velocities on the mechanical and structural properties of polyethylene
terephthalate (PET)/nylon 6 blend fibers have been reported. Fibers of PET/nylon 6 …