C González-Guillén, L Romero-Resendiz… - Journal of Alloys and …, 2024 - Elsevier
Second-phase hardening in refractory high-entropy alloys (RHEAs) has been recognized as one of the main routes to significantly improve their mechanical properties. However, their …
BQ Li, XC Li, X Lu - Journal of Materials Research, 2019 - cambridge.org
In recent years, there has been a significant thrust toward the development of novel implant alloys based on β-Ti with low Young's modulus to prevent stress shielding. In this study …
C Torres-Sanchez, J McLaughlin, R Bonallo - Journal of Materials …, 2018 - Springer
The metal foams of a titanium alloy were designed to study porosity as well as pore size and shape independently. These were manufactured using a powder metallurgy/space-holder …
The alloy density was also determined using the water displacement method, the highest tantalum concentration (20%) resulting on a density of 6.87±0.01 g/cm3. The results showed …
H Demirtas - Materials Science and Technology, 2022 - journals.sagepub.com
The present study investigated the mechanical performance of Ti–8Nb–8Zr–8Cu (at.-%) alloys containing different porosity levels. Metallographic examination and phase analysis of …
Ş Karadeniz, E Arslan - Materials Research, 2022 - SciELO Brasil
Recently, there has been increasing importance on scaffold materials that could be used in biomaterials. In the present study, equimolar TiNbZr medium entropy alloys (MEAs) and …
In this study, porous binary Ti-(x) Zr alloys of nominal Zr contents (x= 10, 20 and 30 at.%) with differing porosities were manufactured, using powder metallurgy with compaction …
L Wang, X Cheng, Y Li, KWK Yeung, W Lu… - Titanium Alloys …, 2013 - hub.hku.hk
Due to its excellent biocompatibility, low density, high strength, and good corrosionresistance, titanium alloys have been used in medical applications for a long time …
YH Li, C Yang, LM Kang, HD Zhao… - Powder …, 2015 - journals.sagepub.com
Porous Ti59. 38Nb26. 6Zr8. 7Fe5. 32 (wt-%, referred to as TNZF) alloys with high strength and low modulus were successfully fabricated by space holder method through adding …