Friction stir welding (FSW), a promising solid state joining process invented at TWI in 1991,
was used to join 9 mm thick 7475 aluminum alloy which is considered essentially …

In the present investigation, A356/C355 aluminium alloys are welded by friction stir welding
by controlling various welding parameters. A356 and C355 aluminium alloys materials have …

Friction stir welding is an innovative welding process for similar and dissimilar joining of the
materials effectively. FSW simply modified the grain structure and also improved the strength …

Welding is used for fabricating various components to increase the application of aluminum
alloys. When compared to fusion welding, friction stir welding (FSW) is used to join non …

In this study, the effects of tool rotational and traverse speeds on the mechanical properties
and the microstructure of the friction stir welded joints from Al 5086-H34 were studied …

Abstract Friction Stir Welding (FSW) was carried out to examine the influence of filler
materials and varying process parameters on the microhardness and the joints corrosion …

The friction stir welding (FSW) of 1050-H24 aluminium alloy was performed to investigate
the mechanical properties of the joints and determine the optimum FSW parameters. The …

Friction is an important factor that causes frictional heat generated in the friction stir welding
process and makes the joint between work pieces. The objective of the present work is …

The quality of friction stir welded joints depends upon the working parameters such as
rotational speed, welding speed, shoulder diameter, tilt angle; etc. Each process parameter …

Fusion welding of cast A319 (Al-Si-Cu) alloy will lead to many problems including porosity,
micro-fissuring, and hot cracking. Friction Stir Welding (FSW) can be used to weld A319 …