The microstructure and mechanical/electrochemical properties of friction stir welded
(FSWed) joints of two dissimilar alloys, 5052-H32 aluminum and dual-phase (DP) steel, are …

The effect of friction stir welding (FSW) parameters on the microstructure, mechanical and
electrical properties of 2024 aluminum alloy and copper joints was investigated. After …

Friction stir welding (FSW) is an effective welding technique to realize the joining of
dissimilar aluminum alloys. The microstructural heterogeneities induced by FSW across the …

The effect of tool traverse speed, offset and rotation direction during dissimilar butt friction stir
welding of Al 5083-H321 and 316L stainless steel plates was studied at constant rotational …

The aluminum alloys joints welded by friction stir welding (FSW) are usually fractured in or
near the thermo-mechanically affected zone (TMAZ) of the welded zone, and different …

The use of aluminum in conjunction of steel can reduce the weight of structures but
dissimilar materials welded structure results in the formation of intermetallic compounds and …

Abstract Dissimilar AA5083 to GL D36 steel welds produced by Friction Stir Welding in lap
joint configuration, with the aluminum plate placed on the advancing side, are studied …

In the present work, the effect of tool axis offset from the joint interface and geometry of the
FSW tool pin on the mechanical and metallographic characteristics of dissimilar friction stir …

This study attempts to find an optimum combination of the welding tool rotation rate (ω) and
traveling speed (υ), concerning the corrosion and mechanical properties of Friction Stir …

A butt joint configuration of AA6061–pure Ti was welded using friction stir welding (FSW)
with an assisted cooling and heating conditions, aiming to attain a flawless joint. Cooling …