Friction stir welding (FSW) of 6061 aluminium alloy butt joint was carried out at each rotation
speed of 600, 800, 1000, 1200 r/min for two different travel speeds, 80 and 100 mm/min, at a …

The subject of this study were the friction stir welded butt joints of the 5 mm thick AA2519-
T62 alloy obtained with four various values of tool rotation speed: 200, 400, 600 and 800 …

The present paper aims to analyze the microstructure, microhardness, tensile properties,
and low cycle fatigue (LCF) behavior of friction stir welded (FSW) butt joints. The material …

The fatigue behavior of AA6060-T6 friction stir welded butt joints was investigated. The joints
were produced by using both a standard and a threaded tri-flute cylindrical-tool with flat …

Tensile and fatigue behavior of a 6N01 aluminum alloy friction stir welded (FSW) joint was
studied. The tensile and fatigue tests were carried out for the large plate and small round bar …

Behavior of fatigue crack which was propagated at some representative areas in the friction
stir welded (FSWed) joint of aluminum alloy 6063-T5 was studied. By extracting the T–L …

Cast aluminum alloy, AC4CH-T6, and wrought aluminum alloy, A6061-T6, were joined by
means of friction stir welding (FSW) technique. The effect of microstructure and post heat …

In this study, the very high cycle fatigue (VHCF) properties of 7050-T7451 aluminum alloy
and its friction stir welding (FSW) butt welds have been investigated. The results show that …

Friction stir welding is a solid state welding method which appeared as a relatively new
welding technology to be used mostly in aluminum alloys. The fatigue behaviours of welded …

Bobbin tool friction stir welding is an expanded technology of friction stir welding, which has
broad application prospects. In this study, an analysis of the microstructure and hardness …