In this paper, the soluble salts from the air pollution control (APC) residues of a sewage
sludge incinerator and solid sodium silicate were used as a hybrid activator to prepare alkali …

Calcium silicate slag (CSS) is the solid waste of the alumina recovery from high-alumina fly
ash project based on combined pre-desilication and lime-soda sintering process. Alkali …

The feasibility of a waste glass powder residue (GP) from glass recycling as partial mineral
precursor to produce alkali-activated materials is investigated. GP served as powder coal fly …

The air pollution control (APC) residues from the sewage sludge incinerators are harmful to
the environment due to their relatively rich soluble salts and heavy metal content. In this …

Alkali-activated materials (AAMs) are a kind of hardened slurry produced by an alkali
activation reaction between a silicate precursor and an alkali activator that is treated as an …

This paper presents a study on alkali activated cement (AAC) mortar produced with waste
soda-lime-silica glass. The waste glass was used simultaneously as a precursor and fine …

This study aims to investigate the feasibility of recycled aggregates (RA) as an internal
curing agent for an alkali activated slag (AAS) system. The physical and chemical …

This paper investigated the properties of alkali-activated slag (AAS) concrete blocks
incorporated with recycled concrete fines (RCFs) and recycled concrete powders (RCPs) …

Alkali-activated materials have attracted a lot of research interest due to the advantage of
less CO 2 emission than ordinary Portland cement (OPC) systems. The use of recycled …

In order to efficiently utilize steel slag and reduce carbon emissions, the performance of
alkali-activated slag/stainless steel slag mortar (ASM) prepared with a composite activator is …