[HTML][HTML] Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys-A review
L Li, W Liu, F Qi, D Wu, Z Zhang - Journal of Magnesium and Alloys, 2022 - Elsevier
Due to lattice reorientation, grain segmentation, induced recrystallization, twins play a very
important role in regulating texture, refining grains, improving mechanical properties and …
important role in regulating texture, refining grains, improving mechanical properties and …
[HTML][HTML] Enhancing the strain hardening and ductility of Mg-Y alloy by introducing stacking faults
Due to the insufficient slip systems, Mg and its alloys exhibit poor ductility during plastic
deformation at room temperature. To solve this problem, alloying is considered as a most …
deformation at room temperature. To solve this problem, alloying is considered as a most …
[HTML][HTML] Dual-phase hetero-structured strategy to improve ductility of a low carbon martensitic steel
Martensitic transformation significantly increases the strength of low-carbon steels, while it is
usually at expense of the formability and ductility. In order to further improve the mechanical …
usually at expense of the formability and ductility. In order to further improve the mechanical …
Structure motif of chemical short-range order in a medium-entropy alloy
The chemical short-range orders (CSRO) are the sub-nanosized entities inherent in high-
/medium-entropy alloys (H/MEA). To discern CSRO poses the challenge with pending …
/medium-entropy alloys (H/MEA). To discern CSRO poses the challenge with pending …
Achieving excellent ductility in high-strength Mg-10.6 Gd-2 Ag alloy via equal channel angular pressing
Excellent ductility and high strength were achieved in the Mg-10.6 Gd-2Ag (wt.%) alloy via
an industrial-scale equal channel angular pressing (ECAP). The ECAP alloy exhibits an …
an industrial-scale equal channel angular pressing (ECAP). The ECAP alloy exhibits an …
[HTML][HTML] High temperature mechanical behavior of low-pressure sand-cast Mg–Gd–Y–Zr magnesium alloy
W Liu, B Zhou, G Wu, L Zhang, X Peng… - Journal of Magnesium and …, 2019 - Elsevier
The aim of this work is firstly to optimize T6 heat-treatment of low-pressure sand-cast Mg–
10Gd–3Y–0.5 Zr alloy, and then systematically investigate the mechanical behavior of the …
10Gd–3Y–0.5 Zr alloy, and then systematically investigate the mechanical behavior of the …
Achieving ultra-fine grains and high strength of Mg–9Li alloy via room-temperature ECAP and post rolling
Ultra-fine grains (UFG's) and high strength was successfully achieved in Mg–9Li alloy via
room temperature (RT) equal channel angular pressing (ECAP) and post rolling. The solid …
room temperature (RT) equal channel angular pressing (ECAP) and post rolling. The solid …
[HTML][HTML] Achieving ultrahigh strength by tuning the hierarchical structure of low-carbon martensitic steel
The high strength of martensitic steel can be attributed to its fine hierarchical structure and
high dislocation density. To further improve the mechanical properties of low-carbon …
high dislocation density. To further improve the mechanical properties of low-carbon …
Enhanced age-hardening response and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy by trace Ag addition
C Huang, C Liu, S Jiang, Y Wan - Journal of Alloys and Compounds, 2021 - Elsevier
In the present study, we have systematically investigated how the influence of silver (Ag)
addition (0.3 wt%) on the microstructural and mechanical properties of Mg-6Gd-3Y-1Zn-0.4 …
addition (0.3 wt%) on the microstructural and mechanical properties of Mg-6Gd-3Y-1Zn-0.4 …
[HTML][HTML] In-situ TEM observations on interaction of basal< a> dislocations and β′ phases in a Mg–Gd binary alloy
Here we report in-situ TEM observations on interaction between dislocations and β′
phases in aged Mg–Gd alloys. The slipping dislocations squash into the interface and bow …
phases in aged Mg–Gd alloys. The slipping dislocations squash into the interface and bow …