The thermophysical properties of Ni–Al. Ni–Ti, and Al–Ti alloys, ie, viscosity and surface tension, have been investigated using the evaluated thermodynamic properties, ie, enthalpy …
Lightweight sheet alloys with superior mechanical performance such as high strength, ductility and formability at room temperature (RT) are desirable for high volume automotive …
R Shi - Journal of Magnesium and Alloys, 2022 - Elsevier
In this work, nonisothermal dissolution of intermetallic Mg 17 Al 12 in Mg-Al alloy has been firstly studied via Differential Scanning Calorimetry-DSC, X-Ray Diffraction-XRD and …
L Huang, W Wang, J Yang, Q Zhu, W Zhang, R Shi - Corrosion Science, 2023 - Elsevier
Segregation-induced oxidation of Cu-15Ni-8Sn (wt%) alloy at 850° C was studied by CALPHAD_based modeling and key experimental characterizations. In this work, the …
R Shi, Z Zhu, AA Luo - Journal of Alloys and Compounds, 2020 - Elsevier
Abstract Aluminum-magnesium (Al–Mg) binary system is the basis of many important Al and Mg alloys. The thermodynamic and atomic-diffusional behaviors of Al-rich or Mg-rich alloys …
X Li, J Li, L Wu, F Zhang, J Chen, J Huang, WB Zhang… - Calphad, 2022 - Elsevier
Viscosity is an important thermodynamic property for alloy design, especially for refractory alloy. CALculation of PHAse Diagram (CALPHAD)-based viscosity calculations are highly …
X Li, X Zuo, J Li, Y Zeng, J Long, J Chen, L Wu - Vacuum, 2023 - Elsevier
Surface tension and viscosity are two main process parameters in the metallurgical industry, especially for high-temperature alloys, such as Zr–Ti–Cu which exhibits excellent …
Y Shi, B Hu, J Zhou, J Chen, Y Wang, X Lan, Q Wang… - Calphad, 2023 - Elsevier
A viscosity model with composition and temperature dependence for the liquid alloys of the Cu–Cr–X (X= Ni, Si, Zr) systems was developed using the CALPHAD (CALculation of …
The paper presents the results of molecular dynamics study of the viscosity of nickel- containing binary metal melts for a wide range of temperatures, including the region of the …