It is well-established that Mg-3Al-1Zn (AZ31) alloy exhibits much better tensile ductility than
pure Mg. However, the underlying mechanisms for such difference still remain relatively …

The grain orientation control via twinning activity on deformation features is of great
significance to offer a key insight into understanding the deformation mechanism of Mg alloy …

This study explored the deformation behavior of rolled pure Mg and Mg-0.5 Ca alloy at room
temperature (RT) and cryogenic temperature (CT) of− 150° C. The samples were …

In this work, we investigated the microstructure and the mechanical properties of extruded
Mg-xGd-0.5 Mn alloys (GMx0) with the variation of Gd content (0, 2, 4, 7 wt.%). For the GM00 …

In this work, the compressive creep behaviors of hot-rolled pure Mg (0Y alloy) and various
hot-rolled Mg-Y binary alloys (0.15 Y, 1.5 Y, 4.5 Y, 7.5 Y, and 10.5 Y alloys) at 523 K were …

Here we report in-situ TEM observations on interaction between dislocations and β′
phases in aged Mg–Gd alloys. The slipping dislocations squash into the interface and bow …

Abstract Mg–1Mn–0.5 Al–0.5 Ca–0.5 Zn (wt.%) alloy was fabricated by conventional
extrusion at 673 K with an extrusion ratio of 25: 1, followed by aging at 473 K. The …

The control of precipitation density has always been a difficult issue in the application of
precipitation strengthening mechanism. Here we reported the precipitation of Mg 2 Ca in a …

Abstract The specific Nd/Gd mass ratios were designed for optimizing the microstructure of
the Mg–8Al–Nd–Gd alloys, and the strengthening mechanism of Al-Gd-Nd phase in the …

A newly developed Mg–2Zn-0.3 Ca-0.2 Ce-0.1 Mn (in weight%, ZXEM2000) wrought alloy
exhibits an exceptionally high tensile ductility (29%±1.4% tensile elongation) along the …