As the forging counterpart of fusion-based additive processes, additive friction stir deposition
offers a solid-state deformation processing route to metal additive manufacturing, in which …

The combination of alloying and thermo-mechanical processing are used to design
advanced magnesium alloys. In this work a comprehensive review of existing ballistic data …

A high strength, good ductility and cost-effective Mg alloy is highly desirable for the light-
weighting application. Here, a combined processing route of hot extrusion with multi-pass …

Dynamic recrystallization (DRX) and the related phenomena take place during
thermomechanical processing that furnishes the final microstructure of a product. The …

Dynamic precipitation and recrystallization behavior during middle-temperature and
appropriate strain rates provide a chance to obtain desirable structure, which significantly …

Complex structures can now be manufactured easily utilizing AM technologies to meet the
pre-requisite objectives such as reduced part numbers, greater functionality, and lightweight …

Grain boundary strengthening is an effective strategy for increasing mechanical properties of
Mg alloys. However, this method offers limited strengthening in bimodal grain-structured Mg …

To resolve the strength-ductility trade-off problem for high-strength Mg alloys, we prepared a
high performance Mg-8Gd-3Y-0.5 Zr (wt%) alloy with yield strength of 371 MPa, ultimate …

High‐power piezoelectric applications are predicted to share approximately one‐third of the
lead‐free piezoelectric ceramic market in 2024 with alkaline niobates as the primary …

The effect of large thickness-reduction on microstructure evolution and tensile properties of
Mg-9Al-1Zn alloy (AZ91) processed by hard-plate rolling (HPR) was investigated. Increasing …