The phase content and the strengthening of two copper alloys, 0.1 Cr–0.1 Zr and 0.9 Cr–0.1
Zr, subjected to aging treatments were studied. The size of second phase particles and the …

In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and
studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro …

In this work, a Cu–Cr–Ag–Mg–Sn alloy was developed assisted by a CALPHAD technique,
by which a suitable chemical composition (Cu-0.5 Cr-0.1 Ag-0.05 Mg-0.05 Sn) and …

Abstract The Cu-1Ni-0.9 Sn-0.5 Ti-0.3 Cr alloy was prepared by vacuum induction melting.
The hot deformation experiments with the alloy were carried out using the Gleeble-1500 …

Abstract Ti additions in Cu–Cr–Zr alloys are useful for achieving high mechanical properties.
In this work, the influence of Ti contents (0.25 wt%, 0.6 wt%, and 1.02 wt%) on the …

Nickel-based superalloy MM247 turbine blades produced through investment casting are
widely used for aero engines and gas turbines. To control the dimensional accuracy of the …

An alloy features‐based and chemical compositions‐based machine learning method was
used to examine the low cycle fatigue life of austenitic stainless steels at different elevated …

The phase equilibria of the Cu–Cr–Ti ternary system were investigated based on key
experiments coupled with thermodynamic modeling. Eighteen ternary alloys were prepared …

The fabrication of high-performance copper alloys by selective laser melting (SLM) is
challenging, and establishing relationships between the process parameters and …

The CuNiCoSi alloy is a promising precipitation strengthening Cu alloy, while the high
content of alloy elements in it increases the difficulty of solid solution, thus it is essential to …