Improving the plasticity of TiAl alloys at room temperature has been a longstanding
challenge for the development of next-generation aerospace engines. By adopting the nacre …

In this work, the Ti, Al and graphene flake powders were used as raw materials, and a Ti 2
AlC/TiAl composite with the bioinspired micro-nano laminated architecture was successfully …

In order to acquire TiAl composites with a multi-scale reinforcing phase, and to improve the
microstructure and tensile properties at elevated temperatures, TiAl alloys have been …

In the present work, Ti 2 AlC/TiAl composite with a bioinspired laminated structure was
fabricated by an in-situ reactive vacuum hot-pressing sintering using flake powder …

Abstract Ti/Al/Ti laminated composites were prepared by hot-pressing and hot-rolling.
Subsequent annealing was used to adjust Ti/Al interface. Then the influence of interface on …

Improving the room temperature (RT) strength/ductility and hot-working capacity based on
lamellar microstructures is of great significance for the practical application of TiAl alloys …

Abstract Layered Ti-Al metal composite (LMC) fabricated by hot-pressing and hot-rolling
process displays higher ductility than that of both components. In this paper, a combination …

Increasing the service temperature of TiAl intermetallics is the main challenge for the
development of next-generation aircraft. Dispersion-strengthening, an effective means to …

The layer thickness has been reported to play a crucial role in laminated metal composites
(LMCs). In this work, Al/Ti/Al LMCs with varying Ti layer thickness but a constant number of …

Abstract TiAl-5wt.% Ti 2 AlC-3wt.% Mn composites reinforced by the addition of Mn and in
situ synthesized Ti 2 AlC nanoparticles with a novel microstructure were fabricated. The …