In this study, a series of cyclic tests on a 304L stainless steel with different loading paths
were conducted. It revealed that as the non-proportionality of loading path increased, the …

In this study, the effect of strain rate on the cyclic behaviour of 304L stainless steel is
investigated to unveil the complex interrelationship between martensitic phase …

In the present paper, the strain-induced martensitic transformation and the cyclic plasticity
model of a metastable austenitic steel AISI 348 under multi-axial cyclic loadings were …

Isothermal monotonic tension and cyclic tests are conducted on type 304 austenitic stainless
steel at 20, 50 and 80° C from which stress-strain curves and martensite volume fraction …

The effects of strain-induced martensitic transformation on the fatigue behavior of type 304
stainless steel were studied. Rotating bending fatigue tests have been conducted in …

The martensitic transformation behavior and mechanical properties of austenitic stainless
steel 304 were studied by both experiments and numerical simulation. Room temperature …

A model for secondary cyclic hardening due to strain-induced martensitic transformation in
metastable austenitic stainless steels is proposed. The model is built on an Armstrong …

This paper addresses the influence of cyclic stress-induced martensitic transformation on
fatigue crack growth rates in metastable austenitic stainless steels. At low applied stress and …

The martensitic phase transformation of the metastable austenitic steel increases yield
strength and ultimate stress, but decreases ductility. Evolution of the martensite depends on …

In situ X-ray diffraction was carried out to identify and evaluate strain-induced martensitic
transformation in 304 austenitic stainless steel under cyclic tensile loading and unloading …