Magnesium-Zinc-Zirconium (Mg-Zn-Zr) alloys have caught considerable attention in medical
applications where biodegradability is critical. The combination of their good …

ZK30 magnesium alloy shows great potential for usage in biomedical implants; however, the
only setback to the alloys' usage is their corrosion properties. For that end, extruded ZK30 …

Ultra-fine grained ZK60 Mg alloy was obtained by multi-pass equal-channel angular
pressing at different temperatures of 250° C, 200° C and 150° C. Microstructural …

In this study, billets of the ZK30 (Mg-3Zn-0.6 Zr-0.4 Mn, wt%) alloy were Equal Channel
Angle Pressing (ECAP) processed for up to four passes of routes Bc (with rotating the …

Mechanical properties and biocorrosion behaviors in simulated body fluid (SBF) of newly
developed Mg–5.8 Zn–0.5 Zr–x Yb (ZK60–x Yb, x= 0, 1.0, 2.0 wt%) magnesium alloys in the …

Influence of grain refinement and residual stress on corrosion behaviour of AZ31
magnesium alloy processed by equal-channel angular pressing (ECAP) in vitro environment …

The combination of solid solution heat treatments and severe plastic deformation by high-
ratio differential speed rolling (HRDSR) resulted in the formation of an ultrafine-grained …

Benefits of RE addition on Mg alloys strength and corrosion resistance are widely reported
but their effects on biodegradability and biocompatibility are still of concern. This paper …

Two step equal channel angular pressing carried out on as cast ZE41 Mg alloy resulted in a
remarkable grain refinement. As compared to grain size of 46 µm in as cast sample …

Commercial ZK60 Mg alloy was processed by multi-pass equal-channel angular pressing
(ECAP) and subsequent aging to investigate the effect of grain refinement and second …