Micromechanical properties of Al, Y-modified silicide coating on Nbsingle bondSi based
alloy were investigated in this paper. The silicide coating prepared by pack cementation …

The microstructure and high-temperature oxidation-resistant performance of several silicide
coatings on an Nb-Ti-Si based alloy were revealed in the present work. These silicide …

The aim of this work is to investigate the compression deformation behavior of the Nb–Si
based alloy with an Al–Y modified silicide coating at different conditions, including the height …

Abstract The Nb-Si alloys are attractive candidate for more advanced aircraft engines,
however their oxidation resistances are poor. In this work, silicide coatings were prepared …

Silicide coatings and B-modified silicide coatings were deposited on Nb-Si-based alloys by
means of pack cementation method at 1573 K. The phase sequence of the coating/substrate …

Abstract The Si-NbSi2 composite coatings were prepared on Nb substrated by hot dip
plating process. The surface and cross section microstructure, element distribution and …

In order to improve the oxidation resistance of silicide coatings on Nb silicide based alloys, Y-
modified silicide coatings were prepared by co-depositing Si and Y at 1050, 1150 and 1250° …

Two kinds of Si-BY co-deposition coatings on an Nb-Ti-Si based alloy were prepared by
pack cementation method and their microstructure and oxidation behavior were …

In order to prepare Al-modified silicide coatings on an Nb-based ultrahigh temperature alloy,
both a two-stage pack cementation technique and a co-deposition pack cementation …

Silicide/aluminide composite coatings were prepared on an Nb–Ti–Si based alloy by a two-
step pack cementation process including siliconizing firstly and then aluminizing. The …