The microstructure of a commercial AZ91 Mg alloy was modified via equal channel angular
pressing (ECAP) and subsequent aging. Immersion corrosion testing in 3.5 wt.% NaCl …

This study aims to establish the effects of equal channel angular pressing (ECAP)
processing on the corrosion behavior and hardness values of the AZ31 Mg alloy. The AZ31 …

Microstructure and corrosion properties of extruded AZ61 Mg alloys with varying Ca contents
were investigated. Microstructure of the extruded AZ61 alloy consisted of α-Mg grains and Al …

The quest for ever, higher performance in structural applications has resulted in the outgoing
development of new or improved materials with novel crystallographic textures …

Effect of microstructure change on corrosion behaviour of equal-channel angular pressed
(ECAPed) AZ91D Mg alloy was investigated. The ECAPed alloy with ultra-fine grained …

Cast AZ80 alloy was subjected to conventional extrusion pressing at 250° C, 300° C, and
350° C. In order to characterize the changes in their microstructure a thorough study was …

The annealing treatments were conducted at various temperatures and time using hot rolled
AZ31 Mg sheets. The effects of annealing temperature and time on the microstructure and …

In this study, AZ31áMg alloys with different grain orientation were prepared to investigate the
influence of texture on corrosion rate in 3.5 áwt.% NaCl. Experimental results showed that …

The influence of trace As content (0.04, 0.05, 0.06 wt%) on the microstructure and corrosion
behavior of AZ91 alloy in different metallurgical conditions (as-cast, as-quenched, peak …

The corrosion behavior of two fine-grained AZ31B alloys was investigated using immersion
test, cyclic neutral-salt spray test and electrochemical analysis, and compared to that of …