The synergistic influences of particle stimulated nucleation (PSN)-assisted dynamic
recrystallisation (DRX), second-phase particles and texture on corrosion behaviour of hard …

The corrosion susceptibility of recrystallized and un-recrystallized grains in equal channel
angular pressed (ECAPed) Mg–9Al–1Zn (AZ91) alloys immersed in chloride containing …

The present study investigates the mechanical and in-vitro corrosion behavior of Mg-4Zn-0.5
Ca-0.8 Mn alloy in optimum homogenized conditions. The optimization of the …

Microstructure, bio-corrosion behavior, and corrosion residual strength in 0.9 wt.% NaCl
solution of the fine-grained Mg-4Zn alloy sheet prepared by high strain rate rolling are …

Magnesium alloys are promising candidates for biomedical applications because of their
advantageous properties. However, a too high degradation rate can be a problem. It is not …

The bio-corrosion behaviour of Mg–3Zn–0.3 Ca (wt.%) alloy in simulated body fluid (SBF) at
37° C has been investigated using immersion testing and electrochemical measurements …

The corrosion mechanism of as-cast, heat-treated (H400) and extruded (E30, E60, E90) Mg-
3Zn-1Mn-1Y alloys with different microstructure is investigated by scan electron microscope …

Microstructure, texture characteristics, mechanical and bio-corrosion properties of the Mg–
5Zn–xSr alloys (x= 0, 0.2, 0.6, 1.0) prepared by high strain rate rolling are carefully studied …

Abstract Effect of Sr on microstructure and corrosion behavior of biodegradable Mg-1Zn-1Mn-
xSr alloy is investigated. Decrease in second phase spacing and linear increase of Mg 17 Sr …

The influences of Ca and Ce/La microalloying on the microstructure evolution and bio-
corrosion resistances of extruded Mg-Zn alloys have been systematically investigated in the …