Solution annealing and age hardening are important processes for achieving good
engineering and chemical properties of alloy 718. The composition of alloy 718 also plays …

Alloy 718 is a γ′(Ni3 (Al, Ti))–γ ″(Ni3Nb) hardenable superalloy with attractive strength,
and corrosion resistance. This alloy is a candidate material for use in accelerator production …

Mechanical testing and microstructural analysis was performed on an Alloy 718 window that
was in use at the Los Alamos Neutron Science Center (LANSCE) Isotope Production Facility …

An increase in ductility with radiation dose was observed and investigated during
postirradiation evaluation of tensile properties, microstructure, deformation behavior, and …

A double-shelled Alloy 718 window was irradiated at the Los Alamos Neutron Science
Center (LANSCE) with a 1 mA, 800 MeV proton beam to a maximum dose of 20 dpa at a …

As an assessment for a possible accelerator beam line window material for the US
Spallation Neutron Source (SNS) target, performance, radiation-induced hardening and …

The objective of this study is to understand the influence of surface treatments, namely laser
shock peening (LSP) and ultrasonic nanocrystal surface modification (UNSM), on the …

Tensile properties of Inconel 718 (IN718) have been investigated after neutron irradiation to
0.0006–1.2 dpa at 60–100° C in the High Flux Isotope Reactor (HFIR) at Oak Ridge National …

Ion-and proton-irradiated Ni-based alloys, Alloy 625 and Alloy 625 Plus, in the as-quenched
and aged conditions, were investigated to understand the precipitation behavior under …

Abstract Effects of neutron irradiation on the microstructure and mechanical properties of
CMRR (China Mianyang Research Reactor) structural material pure aluminum and 6061 …