A new friction-based riveting technique, Rotating Hammer Riveting (RHR), is demonstrated
to fully form AZ31 Mg rivet heads in a mere 0.23 s. Heat and pressure generated through …

A kind of joining method for magnesium alloys, rotation friction pressing riveting (RFPR), is
proposed in this paper. In RFPR operation, a rivet with a plug rotating at high speed is …

In this study, the fabrication of the desired SPR joints was investigated as a function of the
preheat temperature and strain rate. To determine the optimum preheat temperature …

Magnesium alloys are used for many components of mobile electric appliances such as
cellular phones and notebook computers. This is because magnesium alloys have high …

Magnesium and its alloys are attractive in automobile, aircraft and electronic housing due to
their superior specific strength and recyclability. However, it is hard to weld magnesium …

The high strength-to-weight ratio of magnesium alloys makes them attractive for automotive
applications. These materials have been used for the engine cradle, seat frame, and shock …

Magnesium alloys are highly strain rate sensitive and exhibit good workability in a narrow
forging temperature range. Consequently, parts made of these materials are usually forged …

Rapidly solidified (RS) AZ31 magnesium alloy ribbons were made using melt spinning
technique. The results show that its microhardness increases with the wheel speed, and …

This study was aimed at characterizing the microstructure, texture and tensile properties of a
friction stir welded AZ31B-H24 Mg alloy with varying tool rotational rates and welding …

Cast AZ31 magnesium alloy was treated by the single-pass and two-pass friction stir
processing (FSP), respectively, and the microstructure and mechanical properties were …