In situ neutron diffraction study on tensile deformation behavior of carbon-strengthened CoCrFeMnNi high-entropy alloys at room and elevated temperatures
Carbon is doped into a CoCrFeMnNi high-entropy alloy as an interstitial atom, improving the
single phase solid solution alloy with a good combination of strength and ductility at room …
single phase solid solution alloy with a good combination of strength and ductility at room …
Study of Lattice Strain Evolution in Stainless Steel Under Tension: The Role of Self‐Consistent Plasticity Model
The recently developed large strain elastic visco‐plastic self‐consistent (EVPSC) model,
with various popular self‐consistent schemes including the Affine, Meff, Secant, and …
with various popular self‐consistent schemes including the Affine, Meff, Secant, and …
[HTML][HTML] Characterization of the residual stresses in spray-formed steels using neutron diffraction
Neutron diffraction was used to characterize the residual stresses in an as-sprayed tube-
shaped steel preform. The measured residual stress distributions were compared with those …
shaped steel preform. The measured residual stress distributions were compared with those …
316L 不锈钢non-Masing 特性分析和疲劳寿命预测
金丹， 左皓中， 刘兵， 吕春堂， 娄天培 - 中国机械工程, 2020 - cmemo.org.cn
对316L 不锈钢在不同应变范围下分别进行了293 K 和873 K 试验温度下的低周疲劳试验,
讨论了材料循环特性的幅值相关性和温度相关性, 比较了不同条件下non-Masing 特性 …
讨论了材料循环特性的幅值相关性和温度相关性, 比较了不同条件下non-Masing 特性 …
Advantageous description of short fatigue crack growth rates in austenitic stainless steels with distinct properties
L Trávníček, I Kuběna, V Mazánová, T Vojtek, J Polák… - Metals, 2021 - mdpi.com
In this work two approaches to the description of short fatigue crack growth rate under large-
scale yielding condition were comprehensively tested:(i) plastic component of the J-integral …
scale yielding condition were comprehensively tested:(i) plastic component of the J-integral …
球头铣刀铣削球面的表面形貌建模与仿真研究.
范思敏， 肖继明， 董永亨， 洪贤涛… - China Mechanical …, 2020 - search.ebscohost.com
基于齐次坐标矩阵变换原理和矢量运算法则, 建立了工件坐标系下球头铣刀扫掠面的数学模型,
基于ZGMAP 法设计了球形表面形貌的生成算法, 利用该算法对球头铣刀分别采用3D …
基于ZGMAP 法设计了球形表面形貌的生成算法, 利用该算法对球头铣刀分别采用3D …
Bending behavior of a wrought magnesium alloy investigated by the in situ pinhole neutron diffraction method
The tensile twinning and detwinning behaviors of a wrought magnesium alloy have been
investigated during in situ four-point bending using the state-of-the-art high spatial resolution …
investigated during in situ four-point bending using the state-of-the-art high spatial resolution …
Stress-induced charge-ordering process in LiMn2O4
In this letter we report the stress-induced Mn charge-ordering process in the LiMn2O4
spinel, evidenced by the lattice strain evolutions due to the Jahn–Teller effects. In situ …
spinel, evidenced by the lattice strain evolutions due to the Jahn–Teller effects. In situ …
In-situ neutron diffraction analysis of crystal plasticity of retained austenite in bearing steel
The presence of retained austenite in bearing steels can have a significant effect on the
mechanical response of the material at varying length scales. Since retained austenite is …
mechanical response of the material at varying length scales. Since retained austenite is …
[HTML][HTML] RHEGAL: Resistive heating gas enclosure loadframe for in situ neutron scattering
In situ neutron scattering is a powerful tool to reveal materials atomic structural response
such as phase transformation, lattice straining, and texture under external stimuli. The …
such as phase transformation, lattice straining, and texture under external stimuli. The …